Shore 40 EPDM Auto Steering System Gaskets

Shore 40 EPDM (Ethylene Propylene Diene Monomer) is a specific material used for automotive steering system gaskets. EPDM is a synthetic rubber with good durability and elasticity that is commonly used in a variety of automotive seals, including steering system gaskets.

EPDM gaskets are mainly used in automobile steering systems to provide sealing and protection functions. They are usually located between the steering system's connection points, hydraulic channels, or valve bodies to prevent hydraulic fluid leakage, prevent the entry of impurities, and provide effective sealing performance.

EPDM material has the following characteristics and is suitable for automobile steering systems.

High temperature and chemical resistance

EPDM material has good high-temperature resistance and can maintain its elasticity and sealing properties at higher temperatures. It also has excellent chemical resistance and is resistant to a wide range of liquids and chemicals.

Good elasticity and resilience

EPDM material has good elasticity and resilience and can quickly return to its original shape after compression, ensuring the gasket's sealing performance.

Wear resistance

EPDM material has high wear resistance and can resist friction and wear, extending the service life of the gasket.

Applications of EPDM gaskets for automobile steering systems Description

EPDM gaskets for automotive steering systems are widely used in different parts of steering systems, such as hydraulic channels, valve bodies, connection points, etc.

The following are some common uses of EPDM gaskets in automotive steering systems:

1. Prevent hydraulic oil leakage
EPDM gaskets are used as seals to ensure that there is no leakage at various connection points and channels in the hydraulic system. They can effectively prevent hydraulic oil from leaking at key interfaces in the steering system and maintain the normal operation of the system.

2. Prevent impurities from entering
EPDM gaskets can prevent unnecessary contamination by sealing connection points and channels, ensuring system reliability and normal operation.

3. Provide effective sealing performance
EPDM gaskets can withstand the pressure and strain in the hydraulic system and maintain stable sealing performance, ensuring that hydraulic oil flows only in designated channels.

Regular inspection and replacement of EPDM gaskets

Repairing, replacing, and maintaining Shore 40 EPDM auto steering system gaskets are important steps to ensure the proper functioning of the steering system and maintain sealing performance.

1. Regular inspection
Inspect the gasket regularly for signs of damage, aging, hardening, or deformation. If any problems are found, take immediate action to repair or replace the gasket.

2. Cleaning and maintenance
Clean all parts of the steering system regularly, especially those involving gaskets. Use appropriate cleaning agents and tools, and avoid using chemicals that are too corrosive and may damage EPDM gaskets.

3. Timely replacement
When EPDM gaskets show obvious signs of damage, aging, or failure, gaskets should be replaced in time. This includes cracks, hardening, deformation, or loss of elasticity.

4. Correct installation
When replacing gaskets, make sure to install and position the gaskets correctly. Follow the installation guidelines and recommendations provided by the manufacturer to ensure that the gaskets properly seal the connection points and channels.

Please note that specific repair, replacement, and maintenance procedures may vary depending on vehicle model, manufacturer recommendations, and specific circumstances.

Shore 40 EPDM Auto Steering System Gaskets

Physical properties	Rating (metric)	Rating(imperial)
proportion	1.07g/cc	1.07g/cc
Mechanical behavior	Rating (metric)	Rating(imperial)
Shore hardness (Shore A)	40	40
Tensile strength (yield)	9.00 MPa	1310 psi
Elongation length (breaking)	500%	500%
Tear strength	19.0kN/m	108pli
permanent compression	40%	40%
	@Temperature 70.0 C, Time 79200 sec	@Temperature 158℉, Time 22.0 hours
Thermal properties	Fixed value (metric)	Rating(imperial)
Maximum operating temperature, Air	110°C	230℉
Minimum operating temperature, Air	-40.0°C	-40℉
Material description
color	Black

This data is obtained from the manufacturer of the material. Linde Polymer does its best to ensure the accuracy of this data, but does not assume any responsibility for these data values and strongly recommends that the final data be provided by our laboratory for reference during the order discussion stage.

Hot Tags: shore 40 epdm auto steering system gaskets, China shore 40 epdm auto steering system gaskets manufacturers, suppliers, factory, Cylinder Gasket Seals, Automobile Engine ACM Rubber Gasket, Rubber Gaskets