Name: Effluent Pump Seal Rings
Brand: LINDE POLYMER
SKU: 254406225

Description

Technical Parameters

Products Description

Effluent pump seal rings are usually installed between the impeller inlet and pump casing of the pump to increase the backflow resistance, reduce internal leakage, and extend the service life of the impeller and pump casing by controlling the clearance.

Effluent-Pump-Seal-Rings

Benefits of Effluent Pump Seal Rings

Leakage prevention: Mechanical seals are designed to effectively contain leakage around the pump shaft, which is essential to prevent contamination of the surrounding environment. They utilize two planes (one stationary, one rotating) to form a tight seal, thereby minimizing fluid loss.

Versatility: Pumps equipped with mechanical seals can be configured in a variety of ways (single, double, or tandem arrangements), allowing for tailored solutions based on specific operating needs and environmental standards.

Environmental compliance: The use of mechanical seals helps meet strict environmental regulations by minimizing emissions and leakage, thereby supporting sustainable practices in wastewater management.

Customizable: Available in a variety of sizes and designs to meet the needs of specific applications based on different pump specifications and working needs.

Material Technical Data Sheet

PTFE
Property	Unit	Test Method	Typical Value
Specific gravity	g/cm³	ASTM D792	2.17
Tensile strength	MPa	ASTM D638	27
Ultimate elongation	%	ASTM D638	300
Compressive strength 1% deformation	MPa	ASTM D695	4.4
Hardness	Shore D	ASTM D2240	59
Modulus of Elasticity	MPa	ASTM D638	280
Coefficient of thermal expansion from 25 to 100°C	°C^-1	ASTM E 831	16x10^-5
Dielectric Strength (short time Test)	kV/mm	ASTM D149	35

about Us

Company profile

Linde Polymer Tec Co., Ltd. mainly produces a variety of rubber compounds and rubber seals and currently has more than 3,000 material formulas and more than 2,000 product specifications. Products are suitable for automotive, aviation, machinery, petrochemical, medical, food, electronics, military, industrial, and other fields. Since the establishment of the factory, the company has completed the process consistency operation, and the product yield rate has reached 97.1%.