Linde Polymer Tec Co.,Ltd. is one of the most experienced manufacturers and suppliers of corrosion resistant heat resistant wear resistant o-ring seal gasket ring in China, also supports customized service. Please feel free to buy high quality corrosion resistant heat resistant wear resistant o-ring seal gasket ring for sale here from our factory.
Products Description
Corrosion Resistant Heat Resistant Wear Resistant O-ring Seal Gasket Ring
Corrosion resistant heat resistant wear resistant O-ring seal gasket ring is a common sealing element, usually made of rubber or other corrosion-resistant, heat-resistant, and wear-resistant materials.
- O-ring: An O-ring is an annular cross-section seal, usually made of rubber. It is corrosion-resistant, heat-resistant, and wear-resistant, and is widely used in various industrial fields. O-rings fill the sealing gap through compression deformation to prevent liquid or gas leakage.
- Sealing gasket: A sealing gasket is usually a flat annular sealing element used to fill the gap between two sealing surfaces to prevent the leakage of liquid, gas, or dust. Corrosion-resistant, heat-resistant, and wear-resistant sealing gaskets are often used in applications requiring higher sealing performance and durability.
- Gasket (Washer): A gasket is a thin sheet-like sealing element usually used to fill the gap between two connected parts to balance the load and prevent loosening or leakage. Corrosion-resistant, heat-resistant, and wear-resistant gaskets can provide excellent sealing performance and maintain stable performance in harsh environments.
- Ring: An annular sealing element is often used to provide sealing between the shaft and the bore. Corrosion-resistant, heat-resistant, and wear-resistant ring seals provide excellent durability and sealing performance for applications requiring high temperatures, pressures, or chemically corrosive environments.
These corrosion-resistant, heat-resistant, and wear-resistant sealing elements are widely used in many industries, such as chemical industry, petroleum, automobile, aerospace, etc.
Products Description
Standard sized refers
The standard sizes of O-rings are usually formulated according to international standards. The following are some common O-ring standard sizes.
According to ISO 3601 standard:
Metric sizes: Common metric sizes include inner diameter (ID) from 0.5 mm to 1500 mm and cross-sectional diameter (CS) from 0.5 mm to 30 mm.
Imperial Sizes: Common imperial sizes include inner diameter (ID) from 0.02 inches to 26 inches and cross-sectional diameter (CS) from 0.04 inches to 1.04 inches.
According to the AS568 standard (American standard):
AS568 is the O-ring size standard established by the American National Standards Institute (ANSI). It defines a series of commonly used sizes, from No. 001 to No. 932. Each number corresponds to a specific inside diameter, cross-sectional diameter, and thickness.
| ISO No. | I.D. | Width | I.D. Tol. | W. Tol. | ISO No. -107 -108 -109 -110 -111 -112 -113 -114 -115 -116 -117 -118 -119 -120 -121 -122 -123 -124 -125 -126 -127 -128 -129 -130 -131 -132 -133 -134 -135 -136 -137 -138 -139 -140 -141 -142 -143 -144 -145 -146 -147 -148 -149 -150 -151 -152 -153 -154 -155 -156 -157 -158 -159 -160 -161 |
I.D. 5.23 6.02 7.59 9.19 10.77 12.37 13.94 15.54 17.12 18.72 20.29 21.89 23.47 25.07 26.64 28.24 29.82 31.42 32.99 34.59 36.17 37.77 39.34 40.94 42.52 44.12 45.69 47.29 48.90 50.47 52.07 53.64 55.25 56.82 58.42 59.99 61.60 63.17 64.77 66.34 67.95 69.52 71.12 72.69 75.87 82.22 88.57 94.92 101.27 107.62 113.97 120.32 126.67 133.02 139.37 |
Width 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 2.62 |
W. Tol. ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 ± 0.080 |
|
| -1 | 0.74 | 1.02 | ± 0.100 | ± 0.080 | |||||
| -2 | 1.07 | 1.27 | ± 0.100 | ± 0.080 | |||||
| -3 | 1.42 | 1.52 | ± 0.100 | ± 0.080 | |||||
| -4 | 1.78 | 1.78 | ± 0.130 | ± 0.080 | |||||
| -5 | 2.57 | 1.78 | ± 0.130 | ± 0.080 | |||||
| -6 | 2.90 | ± 0.130 | ± 0.080 | ||||||
| -7 | 3.68 | ± 0.130 | ± 0.080 | ||||||
| -8 | 4.47 | ± 0.130 | ± 0.080 | ||||||
| -9 | 5.28 | ± 0.130 | ± 0.080 | ||||||
| -10 | 6.07 | ± 0.130 | ± 0.080 | ||||||
| -11 | 7.65 | ± 0.130 | ± 0.080 | ||||||
| -12 | 9.25 | ± 0.130 | ± 0.080 | ||||||
| -13 | 10.82 | ± 0.130 | ± 0.080 | ||||||
| -14 | 12.42 | ± 0.130 | ± 0.080 | ||||||
| -15 | 14.00 | ± 0.180 | ± 0.080 | ||||||
| -16 | 15.60 | ± 0.230 | ± 0.080 | ||||||
| -17 | 17.17 | ± 0.230 | ± 0.080 | ||||||
| -18 | 18.77 | ± 0.230 | ± 0.080 | ||||||
| -19 | 20.35 | ± 0.230 | ± 0.080 | ||||||
| -20 | 21.95 | ± 0.230 | ± 0.080 | ||||||
| -21 | 23.52 | ± 0.230 | ± 0.080 | ||||||
| -22 | 25.12 | ± 0.250 | ± 0.080 | ||||||
| -23 | 26.70 | ± 0.250 | ± 0.080 | ||||||
| -24 | 28.30 | ± 0.250 | ± 0.080 | ||||||
| -25 | 29.87 | ± 0.280 | ± 0.080 | ||||||
| -26 | 31.47 | ± 0.280 | ± 0.080 | ||||||
| -27 | 33.05 | ± 0.280 | ± 0.080 | ||||||
| -28 | 34.65 | ± 0.330 | ± 0.080 | ||||||
| -29 | 37.82 | ± 0.330 | ± 0.080 | ||||||
| -30 | 41.00 | ± 0.330 | ± 0.080 | ||||||
| -31 | 44.17 | ± 0.380 | ± 0.080 | ||||||
| -32 | 47.35 | ± 0.380 | ± 0.080 | ||||||
| -33 | 50.52 | ± 0.460 | ± 0.080 | ||||||
| -34 | 53.70 | ± 0.460 | ± 0.080 | ||||||
| -35 | 56.87 | ± 0.460 | ± 0.080 | ||||||
| -36 | 60.05 | ± 0.460 | ± 0.080 | ||||||
| -37 | 63.22 | ± 0.460 | ± 0.080 | ||||||
| -38 | 66.40 | ± 0.510 | ± 0.080 | ||||||
| -39 | 69.57 | ± 0.510 | ± 0.080 | ||||||
| -40 | 72.75 | ± 0.510 | ± 0.080 | ||||||
| -41 | 75.92 | ± 0.610 | ± 0.080 | ||||||
| -42 | 82.27 | ± 0.610 | ± 0.080 | ||||||
| -43 | 88.62 | ± 0.610 | ± 0.080 | ||||||
| -44 | 94.97 | ± 0.690 | ± 0.080 | ||||||
| -45 | 101.32 | ± 0.690 | ± 0.080 | ||||||
| -46 | 107.67 | ± 0.760 | ± 0.080 | ||||||
| -47 | 114.02 | ± 0.760 | ± 0.080 | ||||||
| -48 | 120.37 | ± 0.760 | ± 0.080 | ||||||
| -49 | 126.72 | ± 0.940 | ± 0.080 | ||||||
| -50 | 133.07 | ± 0.940 | ± 0.080 | ||||||
| -102 | 1.24 | 2.62 | ± 0.130 | ± 0.080 | |||||
| -103 | 2.06 | 2.62 | ± 0.130 | ± 0.080 | |||||
| -104 | 2.84 | 2.62 | ± 0.130 | ± 0.080 | |||||
| -105 | 3.63 | 2.62 | ± 0.130 | ± 0.080 | |||||
| -106 | 4.42 | 2.62 | ± 0.130 | ± 0.080 | |||||
Other custom sizes:
In addition to the above standard sizes, O-rings can also be produced in specific custom sizes based on specific needs. Custom sizes may be available for special applications, non-standard equipment, or special operating conditions.
The standard dimensions of sealing gaskets are usually formulated according to international standards or industry standards.
Hot Tags: corrosion resistant heat resistant wear resistant o-ring seal gasket ring, China corrosion resistant heat resistant wear resistant o-ring seal gasket ring manufacturers, suppliers, factory, U shape Heating Element Silicone Seal Rings, O Ring Assortment Kit, Spectrometers Rubber Sealing O Ring, Cylinder Rubber U Ring, XNBR Sealed Piston, Peek Back up Ring
