ISO3601 Standard Metric Fluorosilicone O-Ring

special features

Material characteristics: Fluorosilicone rubber has high-temperature resistance and oil resistance, and can provide effective sealing in high-temperature environments and contact with lubricants, liquid fuels, etc.

• Dimensions and tolerances: The ISO 3601 standard specifies the size range and tolerance requirements for this type of O-ring to ensure that it matches equipment and components that comply with the ISO 3601 standard.

• Performance testing: The ISO 3601 standard stipulates the performance testing method of O-rings, including tests on compression deformation, wear resistance, temperature resistance, etc., to ensure that its performance meets the requirements.

• Interchangeability: O-rings manufactured using ISO 3601 standards are interchangeable, that is, O-rings of this type produced by different manufacturers can replace each other in size and performance, providing greater flexibility and selectivity.

In short, the ISO3601 Standard Metric Fluorosilicone O-Ring is a fluoroSilicone O-ring that complies with ISO 3601 standards. Its special feature is that it has high-temperature resistance and oil resistance, and complies with international standards, ensuring dimensional consistency and reliable performance.

Application scenarios

ISO 3601 Standard Metric Fluorosilicone O-Ring can exert its special performance in the following application scenarios:

1. High-temperature environment: Because fluorosilicone rubber has good high-temperature stability, Metric Fluorosilicone O-Ring is often used in applications that require sealing under high-temperature conditions. For example, in engines, gas turbines, high-temperature furnaces, and other equipment, where high-temperature resistant seals are required.

2. Corrosive media: Fluorosilicone rubber has good chemical resistance to acids, alkalis, solvents, and some organic compounds, so Metric Fluorosilicone O-Ring is suitable for sealing requirements that need to resist corrosive media. For example, equipment in the chemical industry, petrochemical industry, pharmaceuticals, and other fields, are often used to seal interfaces with liquids, gases, or chemicals.

3. Low-temperature environment: Compared with ordinary silicone rubber, fluoro silicone rubber has better low-temperature elasticity and cold resistance. Metric Fluorosilicone O-Ring is suitable for applications that need to maintain sealing performance and softness in low-temperature environments. For example, used in refrigeration equipment, cryogenic laboratories, food-freezing facilities, etc.

4. Contact with lubricating media: Fluorosilicone rubber has good oil resistance. Metric Fluorosilicone O-Ring is often used in sealing applications that require contact with lubricating media such as lubricating oil and hydraulic oil. For example, it is used in hydraulic systems, lubrication devices, engine lubrication components, and other equipment.

Durometer Options for Metric O-Rings

The hardness of metric or imperial o rings is measured in a durometer. A lower durometer equals a softer, more pliable material that stretches easily and can be used to seal rough or irregular surfaces. Metric O-rings with a higher durometer are stiffer but provide better resistance to abrasion that could cause a softer elastomer to fail.

• 40
• 50
• 60
• 70
• 75
• 90
• Customized hardness is also available.

Color Options for Metric O-Rings

• Black
• Brown
• Rust/orange
• Translucent/clear
• Custom colors are also available.

Dimensions of ISO3601 Metric O-Ring

ISO 3601 is a standard issued by the International Organization of Standardization that specifies O-ring dimensions in metric sizes.