Which Diving-related Equipment Uses Rubber Seals

Mask: The edge of the mask usually uses a rubber seal, which is used to fit closely with the diver's face, forming a seal, preventing seawater from entering the inside of the mask, and ensuring that the diver has a clear view underwater. The softness of the rubber seals adapts to different facial contours, providing a comfortable fit.

Regulators: Rubber seals are used in the various connections of the regulator and some of the valves and diaphragms inside. These seals ensure the proper flow of breathing gas inside the regulator, preventing leakage and keeping the diver breathing smoothly and safely.

Wetsuit: Rubber or rubber seals will be used on the neckline, cuffs, zippers, and some seams of the wetsuit. They prevent seawater from entering the suit, keeping the diver's body warm and dry, while the elasticity of the rubber ensures the diver's flexibility in the water.

Submersible cylinder: The connection between the valve and the mouth of the submersible cylinder requires a rubber seal to ensure the tightness of the gas and prevent the leakage of high-pressure gas in the cylinder. These seals are subject to high pressure and have good corrosion and aging resistance to ensure the safety and reliability of the cylinder during use.

Dive Computer Watch: The casing of a dive computer is usually waterproof with rubber seals to protect the electronic components inside from seawater. The rubber seals maintain good sealing performance under different water pressure conditions, ensuring that the computer watch works properly and provides divers with accurate dive data.

Underwater lighting equipment: Rubber seals will be used in the shell sealing, battery compartment, and connection between the lamp head and the lamp body of the underwater lighting fixture to prevent seawater from entering the lamp and damaging the bulb and circuit, and ensure that the lighting equipment can shine normally underwater.

Buoyancy Adjustment Device (BCD): The BCD's inflation valve, exhaust valve, and connection with the gas cylinder all need rubber seals to control the inflow and exit of gas, ensure that the BCD can be properly inflated and exhausted, realize the diver's buoyancy adjustment in the water, and maintain the balance of the body and the suspension state at different depths.

Fins: Rubber seals will be used for the parts where some fins are connected to the diver's feet, which play a better role in fixing and sealing, preventing water from entering between the fins and the feet, improving the efficiency and comfort of the fins, and enabling the diver to push the body forward more effectively when kicking the water.