Linde Polymer Tec Co.,Ltd. is one of the most experienced manufacturers and suppliers of 90 degree small wiring stud boot in China, also supports customized service. Please feel free to buy high quality 90 degree small wiring stud boot for sale here from our factory.
Products Description
| Product Name | Product Description | Capabilities Applied/Processes | Overall Dimensions of the Seal |
| 90 Degree Small Wiring Stud Boot | Our small 19mm 90-degree wire harness boot is used for alternator terminator rubber boot |
Protect the alternator and starter motor positive terminals | Face Hole Size:15mm Max Total Wire Diameter:9mm |
| Material Used | EPDM |
| Benefits | Protect the alternator and starter motor positive terminals |
| In-process testing performed | Customer Life-Test |
| Estimated Part Weight | |
| Standards Met | RMA Standards |
| Industry for Use | Automotive generator terminal rubber sleeve |
Your Advantages With 90 Degree Small Wiring Stud Boot
-
Excellent heat resistance
-
Good aging resistance
-
Good resilience
-
Excellent insulation properties
-
Excellent stability
-
Good ozone resistance and low-temperature resistance
-
Excellent oil resistance
Our small 19mm 90-degree wire harness boot for alternator terminal rubber boot, the material used is EPDM, which has the characteristics of aging resistance, weather resistance, electrical insulation, impact elasticity, oil resistance, and so on. At present, the main application scope of 90 Degree Small Wiring Stud Boot is the rubber sleeve of the alternator terminal.
maintenance
The 90-degree small Wiring Stud Boot is a waterproof and oil-resistant seal used to protect wires and cables, usually made of rubber or synthetic rubber. Here's how to maintain it:
1. Check the appearance: Check the appearance of the Small Wiring Stud Boot regularly to see if there is wear, cracks, aging, etc. If abnormalities are found, they should be replaced in time.
2. Keep it clean: During use, the Small Rubber Wiring Stud Boot should be kept clean to avoid oil, dirt, debris, and other residues. Accumulated dirt can be cleaned using appropriate cleaning agents.
3. Regular replacement: Regularly replace the Small Wiring Stud Boot based on usage and manufacturer's recommendations. When replacing, seals that match the original model should be selected and installed according to the correct installation method.
4. Pay attention to installation: When installing the Wiring Stud Boot, make sure that wires and cables are properly fixed to avoid excessive bending or twisting. At the same time, ensure that the seals are installed correctly without missing or incorrect installation.
5. Storage: When storing the 90-degree small Wiring Stud Boot, it should be stored in a dry, cool, well-ventilated place, away from direct sunlight and high-temperature environments. At the same time, contact with harmful substances should be avoided to prevent damage to the seals.
Hot Tags: 90 degree small wiring stud boot, China 90 degree small wiring stud boot manufacturers, suppliers, factory, 2Pin Ribbed Connector Plug Rubber Boot, Truck Shock Absorber Boot Dust, 2Pin 90 Degree Connector Plug Rubber Boot, Door and Boot Wiring Sheath Grommet, SBR Grommet, 90 Degree Round Wiring Grommet
