Products Description
| Product Name | Product Description | Capabilities Applied/Processes |
| 3PIN Ribbed Connector Plug Rubber Boot | Our 3-pin plug ribbed rubber boot is used for running your wire and waterproofing your Fuel Injector & Ignit or plugs | For laying electrical wiring and waterproofing fuel injector and ignition plugs |
| Material：EPDM 60 | ||||
| Color：Black | ||||
|
property
|
unit
|
test method
|
test parameter
|
value
|
|
hardness
|
Shore A
|
ASTM D 2240
|
60 ±5
|
|
|
tensile strength
|
MPa
|
ASTM D 412
|
11,9
|
|
|
ultimate elongation
|
%
|
ASTM D 412
|
542
|
|
|
compression set
|
%
|
ASTM D 395 B
|
22h / 125 °C plied
|
36
|
|
specific gravity
|
g/cm3
|
ASTM D 297
|
1,17
|
|
|
low temp. resistance
|
°C
|
ASTM D 2137
|
brittleness
no cracks
after 3 min. at
|
-55
|
|
low temp. resistance
|
°C
|
ASTM D 1329
|
TR10
|
-45,3
|
functions
The functions of 3PIN Ribbed Connector Plug Rubber Boot mainly include the following aspects:
1. Protection: Rubber boots can protect the metal part of the 3PIN Ribbed Connector Plug from the external environment, such as preventing oxidation, corrosion, wear, etc. This helps maintain good connector performance and extend its service life.
2. Enhance stability: Rubber boots can increase the friction of the connector, making the connector more stable and less likely to loosen or fall off. This is very helpful in ensuring the reliability and stability of the connector.
3. Insulation: Rubber boots can play a certain insulation role and protect the metal part of the connector from dangerous situations such as electric shock.
FAQs
Q1: What is a 3PIN Ribbed Connector Plug Rubber Boot?
A1: Ribbed Connector Plug Rubber Boot is a rubber boot used to protect 3PIN connectors. It is usually ribbed to improve its mechanical performance. It is elastic and tough, protecting the metal parts of the connector and enhancing its stability.
Q2: What is the main function of Ribbed Connector Plug Rubber Boot?
A2: Its main function is to protect the metal part of the connector, enhance its stability, provide waterproof and insulating functions, and facilitate plugging and unplugging. It helps maintain good connector performance and extend its service life.
Q3: Why do you need to use a 3PIN Ribbed Connector Plug Rubber Boot?
A3: Using a Rubber Boot can protect the metal part of the connector from the external environment, such as oxidation, corrosion, wear, etc. In addition, it can also increase the friction of the connector, making it more stable and less likely to loosen or fall off. At the same time, Rubber Boot also has certain waterproof and insulation functions, which can ensure the electrical performance and safety of the connector.
Q4: How to install and disassemble correctly?
A4: When installing, first make sure the metal part of the connector is dry and clean, then put the Rubber Boot on the connector and make sure it is tight. To remove, gently pull the edges of the Rubber Boot to remove it from the connector. Avoid using sharp tools or excessive force to avoid damaging the Rubber Boot or the metal parts of the connector.
Hot Tags: 3pin ribbed connector plug rubber boot, China 3pin ribbed connector plug rubber boot manufacturers, suppliers, factory, Rubber Grommets, Rubber Wiring Harness Sheath, Long Tube Wiring Grommet, 90 Degree Long Wiring Boot Grommet, Round Wiring Harness Grommet, 2Pin 90 Degree Connector Plug Rubber Boot
