Name: Transmission Output Shaft Seal
Brand: LINDE POLYMER
SKU: 254509445

Description

Technical Parameters

Products Description

The transmission output shaft seal is an important component used in automotive transmissions. Its main function is to prevent the leakage of lubricating oil inside the transmission and to prevent external contaminants (such as dust and water) from entering the transmission.

Transmission-Output-Shaft-Seal

The designs of transmission output shaft seals include traditional shaft seals with garter springs, as well as seals with PTFE (polytetrafluoroethylene) sealing lips. These seals can be combined with a variety of dust protection devices, such as radial and axial dust lips and dust felt rings, to adapt to different pollution levels and operating conditions.

In addition, the material selection of the transmission output shaft seal is also very critical. It needs to be able to withstand high temperatures and high-speed working environments. Commonly used materials include ACM, AEM, HNBR, and FKM.

Advantages and Functions of Transmission Output Shaft Seals

Fluid Retention: The main benefit of an output shaft seal is its ability to prevent transmission fluid from leaking out of the transmission housing.

Contamination Prevention: These seals help prevent dirt, dust, and other contaminants from entering the transmission.

Cost-Effective Maintenance: By preventing leaks and protecting internal components, output shaft seals can help avoid costly repairs due to insufficient lubrication that can cause transmission overheating or damage.

Sealing Mechanism: The seal acts as a barrier where the driveshaft yoke enters the transmission, effectively sealing this connection to prevent fluid leaks.

Facilitates Power Transfer: Transmission output shaft seals help efficiently transfer power from the engine to the wheels, ensuring necessary lubrication is maintained within the drivetrain.

Material Technical Data Sheet

AEM
Properties	Value	Unit	DIN Standard
Hardness	87 ± 5	Shore A	DIN ISO 7619-1
Density	1.30	g/cm³	DIN EN ISO 1183-1
100% Modulus	10	MPa	DIN 53504
Elongation at break	191	%	DIN 53504
Tensile strength		MPa	DIN 53504
Compression set 23°C/70h		%	DIN ISO 815-1
Compression set 70°C/70h		%	DIN ISO 815-1
Compression set 125°C/22h		%	DIN ISO 815-1
Rebound resilience	23	%	DIN ISO 4662:2017
Tear resistance	5.8	N/mm	DIN ISO 34-1 A
Abrasion resistance		mm³	DIN ISO 4649 B
min. Service temperature	- 30	°C
max. Service temperature	+150	°C

about Us

Company profile

Linde Polymer Tec Co., Ltd. mainly produces a variety of rubber compounds and rubber seals and currently has more than 3,000 material formulas and more than 2,000 product specifications. Products are suitable for automotive, aviation, machinery, petrochemical, medical, food, electronics, military, industrial, and other fields. Since the establishment of the factory, the company has completed the process consistency operation, and the product yield rate has reached 97.1%.