Introduction To FVMQ

FVMQ Material Description

 

Introduction

 

1

The mechanical and physical properties are very similar to silicone.

2

However, Flourosilicone offers improved fuel and mineral oil resistance but poor hot-air resistance in comparison.

3

Suggested operating temperature (-100° to 350° F). Trade names include FSE® (General Electric Co.), Silastic® (Dow Chemical), and Sylon® (3M Corporation).

 

Tensile Strength(MPa) Elongation(%) Working temperature(°F) Volume resistance( Ω・cm, 25°C )
6.0 ~ 13.0 300 ~ 500 -100 ~ 350 1010~1014

 

 

Important features

 

1

Oil resistance, solvent resistance, chemical resistance

 Its oil resistance, solvent resistance and chemical resistance are extremely good; It can be said that fluorosilicone rubber is the only elastomer that is resistant to non-polar media at --100°F ~ 350°F.

Even in gasoline/methanol hybrid systems, there is almost no change after a long impregnation test of 500h.

2

Electrical properties and radiation resistance

The electrical properties of fluorosilicone rubber are similar to those of ordinary silicone rubber, but the special value is that there is little change under harsh conditions such as high temperature, low temperature, humidity, oil, solvent, chemicals, and ozone.

3

Physical and mechanical properties

Fluorosilicone rubber, like ordinary silicone rubber, has a relatively low mechanical strength (especially tear strength).

4

Other features

Fluorosilicone rubber has excellent weather aging resistance and maintains good performance even after 5 years of exposure.